Enhance the weight bearing capacity of your system with Metro Super Erecta Heavy-Duty Dunnage Shelves. Designed to be used with Metro SiteSelect Posts and Super Erecta or Super Adjustable Shelves.  Available in 18", 21" and 24"(457, 533, 610mm) depths and  24", 30" 36", 48", 54" and 60" (610, 760, 914, 1219, 1372, 1524mm) lengths, Metroseal 3 finish.  Order SiteSelect posts and shelves separately.

For use as bottom dunnage shelf on SmartLever product line, order (1) LSH1 Leg Hooks per shelf:  Must be ordered separately.

The static load capacity (uniformly distributed) for a 36" shelf is 1,600 lbs. (725kg), 48" shelf is 1,300 lbs. (590kg) and a 60" shelf is 1,000 lbs. (453kg).  This shelf has a removable wire deck. NSF Approved.

For product specification sheet 10.45, click here.

The Metro® MetroSeal 3 Finish is a multi-layer corrosion resistant finish consisting of a proprietary cross linked thermoset epoxy enhanced with Microban antimicrobial protection over a zinc chromate coating. Metroseal 3 with Microban provides protection from bacteria, mold, mildew, and fungi build-up that may cause odor, stains, and product degradation, while displaying excellent abrasion, gouge, and chemical resistance properties. Metroseal 3 is intended for use in damp locations and has a 12-year limited warranty against rust formation.

Important: In stationary shelving, stability decreases as the ratio of height to width increases and when heavier loads are placed on upper shelves.  Keep units as wide and low as possible, using the dunnage shelf as the bottom shelf.  If two dunnage shelves are being used, both should be placed within the lower half of the unit.

Catalog nos. 1824DRK3, 1830DRK3, 1836DRK3, 1848DRK3, 1854DRK3, 1860DRK3, 2124DRK3, 2130DRK3, 2136DRK3, 2148DRK3, 2424DRK3, 2430DRCK3, 2436DRK3, 2448DRK3, 2454DRK3, 2460DRK3