Single Door Case Cart, Stainless Steel

The functional design of Metro Case Carts maximize usable inside space for handling storage and transport tasks efficiently.  Carts can be used wherever contents must be protected from an “unclean” environment, including  laboratories, free-standing ambulatory care centers, surgicenters and hospital based or out-patient surgeries.

The embossed sides and back, reinforced top and floor, softer wheels and other noise dampeners, provide a noticeably quieter ride.  The stainless steel cabinet and optional shelves have smooth or protected edges to eliminate ripping of packs that can cause costly waste or reprocessing.  The carts are designed to maximize interior cubic storage space and minimize the exterior footprint delivering the most cubic storage capacity per square foot, providing ample capacity for transport and efficiency for staging. The non-marking wraparound bumpers have reinforced corners and are replaceable.

Double-panel door construction offers better strength and minimizes maintenance.  Caster channels on each side of the cart allows individual replacement should a damaging situation occur.  In the same situation, other models would have to replace the entire dolly.  Full length handles on both sides of the low and high profile and carts allow for pushing or pulling from either end and provide better cart control.  Also available is a Passive Lock/Latch system on specified models, offering the benefit of inventory control for case contents.

Type 304 stainless steel (No. 3 finish type) construction makes units cart washable.  Shelves and brackets remove for washing.  Weep holes at the cart’s front corners and underside of door panels facilitate drainage and drying.  High-profile models save floor space as compared to conventional case carts.  The vertical design eliminates “stooping” and offers quick, easy “stand-up” access to most contents. Stainless Steel casters are standard, one swivel lock, two swivel with brake, one swivel on 36” and 48” models; two swivel, two swivel with brake on other models.  All hardware, top plate and horn are stainless steel. The thermoplastic rubber wheels with rounded tread design provides a softer, quieter ride than traditional flat faced wheels.  The non-marking material also resists flat spotting and repels floor debris.  Delrin bearings are self lubricating.  The casters are non-corrosive and cart-washable.

Optional wire roller shelf extends out half way, easily and quietly, even at lowest level where accessibility is vital.  Shelves are also available in solid or wire without roller.  Please note that interior shelves are optional and must be ordered separately.  See Catalog nos.  CWS Series, CRS Series or CSS Series.

Please select from the following:

Low Profile Case Carts - 28-5/8”d x 33”w x 38-5/16”h (727x839x974mm)**

#CASE24-L6S, 6” (152mm) stainless steel casters*
#CASE24-L6S-P, Passive Lock/Latch, 6” (152mm) stainless steel casters*

High Profile Case Carts - 28-5/8”d x 33”w x 56-3/16”h (727x839x1428mm)**

#CASE24-H6S, 6” (152MM) stainless steel casters*
#CASE24-H6S-P, Passive Lock/Latch, 6” (152mm) stainless steel casters*

For a specification sheet 33.10, please click here.

For Cleaning Guide, please click here.

*Adds 1” to overall height measurement.
**Available with extended tops and custom sizes, minimums may apply.  Contact us directly for quotation information.

Please allow a 15 - 20 working day leadtime for Case Carts.

Metro Single Door Case Carts
Click To Enlarge
  • Item #: CASE-24 Series
  • Manufacturer: Metro
  * Marked fields are required.
Price $2,700.28

Related Items